Taste, Odor and Chlorine
Carbon Filtration for Well Water in Western NC
Water that tastes or smells off, or a chlorine taste after the well was disinfected? Case Water Systems tests the water first, then installs a whole-house carbon filter when carbon is the right tool.
Fully licensed and insured. Work is performed onsite by a licensed contractor.
Taste, odor or chlorine?
What a carbon filter does
Activated carbon is a bed of very porous granules. As water moves through the tank, many dissolved chemicals stick to the carbon and stay there. It’s the standard tool for chlorine, for a lot of off tastes and odors, and for many organic chemicals, including many VOCs (volatile organic compounds, such as solvents and fuel components).
NSF sorts filters by what they are certified to do. NSF/ANSI 42 covers aesthetic problems like chlorine, taste and odor. NSF/ANSI 53 covers contaminants with a health effect. NSF also points out that a certification doesn’t mean a filter removes everything, so we match the equipment to what your test actually found.
What carbon won’t fix
Carbon isn’t a cure-all. EPA guidance notes that carbon filters won’t remove bacteria, hardness or nitrates, and they take out very little of most other minerals. On a mountain well, that means:
- Bacteria: carbon doesn’t disinfect, and a carbon bed that isn’t maintained can give bacteria a place to grow. UV treatment is the usual answer.
- Iron, manganese and a strong sulfur smell: these foul carbon fast. They need an iron and sulfur filter ahead of it.
- Hard water: that’s a job for a water softener.
- Acidic water: low pH needs an acid neutralizer.
- Sediment: grit and sand go to a sediment filter first, so the carbon doesn’t clog.
Chlorine, taste and odor on a well
Most private wells aren’t chlorinated, so a chlorine taste usually shows up in one of two cases: after a well chlorination, or where the house has a chlorine feed for bacteria or iron. Either way, a carbon filter after that treatment takes out the leftover chlorine taste and smell. Musty, earthy or chemical tastes are another common reason to look at carbon, once a test shows nothing more serious is going on.
Carbon does its best work as the last step. When the test calls for other treatment, we put that equipment ahead of the carbon so the carbon only has to handle what’s left.
VOCs: test before you treat
VOCs can reach a well from things like fuel spills, old storage tanks or solvents. The EPA lists granular activated carbon as an effective treatment for most of the VOCs it regulates, but not all of them; vinyl chloride is one carbon doesn’t remove. Many VOCs can’t be noticed by taste or smell, so the only way to know is a lab test that includes them.
If VOCs are found, state health guidance recommends whole-house treatment, because these chemicals also get into the air during a shower. Start with a water test so the filter is sized to numbers, not guesses. Current testing rates are on our inspection pricing page.
Equipment, upkeep and where we work
The whole-house carbon filters we install mainly use CSI (Chandler Systems) and Clack control valves. Carbon gets used up over time, so plan on an annual filter media maintenance visit, sooner if the taste or smell comes back. We service carbon filters from every brand, not just the ones we install. We’re a Chandler Systems dealer and a WQA Certified Installer.
We work from our shop in Candler and install carbon filters across all 13 Western North Carolina counties we serve, including Asheville, Weaverville, Hendersonville and Waynesville and the towns below. Well water treatment shows how carbon fits with the other systems.
- Buncombe County — Asheville, Candler, Weaverville, Black Mountain, Leicester, Fairview and Arden
- Haywood County — Waynesville, Canton and Clyde
- Henderson County — Hendersonville, Fletcher, Mills River and Etowah
- Madison County — Marshall and Mars Hill
- Jackson County — Sylva and Cullowhee
- Macon County — Franklin and Highlands
- Swain County — Bryson City
- Transylvania County — Brevard and Pisgah Forest
- Yancey County — Burnsville
- Mitchell County — Spruce Pine and Bakersville
- McDowell County — Marion and Old Fort
- Rutherford County — Rutherfordton and Lake Lure
- Polk County — Columbus and Tryon
Carbon filter questions
Does a carbon filter remove chlorine?
Yes. Taking out chlorine taste and odor is what carbon does best. Filters certified to NSF/ANSI 42 are rated for chlorine, taste and odor.
Will a carbon filter make my well water safe to drink?
Not on its own. Carbon doesn’t kill bacteria, and it won’t remove nitrates. Test the water first, and add UV if bacteria are a concern.
Can carbon fix a rotten-egg smell?
A strong sulfur smell, or iron in the water, needs an iron and sulfur filter first. Carbon can follow it to polish the taste.
Does carbon remove VOCs?
Many of them. The EPA lists granular activated carbon as an effective treatment for most regulated VOCs, but not every one. A lab test shows what’s in the water and whether carbon fits.
How often does a carbon filter need service?
Plan on an annual media maintenance visit. If the taste or smell comes back sooner, the carbon may be used up.
Do you service carbon filters someone else installed?
Yes. We mainly install CSI (Chandler Systems) and Clack, and we service all brands.
Want water that tastes right?
Tell us what you taste or smell, and share a lab report if you have one. We’ll call or text to confirm a time. If you have no water, call (828) 222-4160.