Spring Water Systems
Trouble usually starts up at the box
Spring box maintenance and repair in Western NC usually starts at the box. It sits up the hill where nobody looks at it, the lid shifts, a root works through a crack, and a few weeks later the water at the house turns cloudy after every storm. You don’t need to be a contractor to keep an eye on a box. Here is what to look at when you walk up there, and when the structure itself needs a repair.
What to look at when you walk up the hill

Go on a dry day and again after a hard rain if you can. Bring a flashlight, gloves and something to pry the lid with. Don’t climb into a box or a tank; they’re tight, wet spaces and a cover can slip.
The lid is the first thing that fails. Concrete lids crack, wood rots, and tin rusts through. A lid that has been knocked a few inches off by a falling limb or a curious bear lets in leaves, rain and anything that crawls. The lid should sit tight and overlap the walls so rain sheds off instead of running in. If you can slide a finger under it anywhere, so can water.
Shine a light inside. You want clear water and a clean bottom. A layer of silt, leaves, sticks, roots, green growth on the walls, or water that is already cloudy in the box all mean the box needs attention. A salamander, frog or insect is a sign there is an opening big enough to let surface water in.
The walls, the ground above, and when cleaning isn’t enough
Most of the water should come in from the back, through the ground, where it has been filtered by soil. Look for cracks in the walls, gaps where the walls meet the hillside, and roots pushing through. A crack near the top is worse than one near the bottom, because that is where runoff gets in.
Step back and look uphill. A road, a path, a cleared bank or a pasture can send rainwater straight toward the box. A shallow ditch or berm that carries runoff around it is one of the most useful things a spring can have, and a lot of old ones don’t. Keep livestock away from the source.
We clean boxes that are still sound, and we rebuild or replace them when the lid, walls or inlet can no longer be sealed. After the work, the water should be tested. Lab work is booked as its own add-on. See spring box repair and spring inspections. We work on existing spring systems. New spring development is evaluated case by case.
Questions we get about this
How often should I check my spring box?
Walk up to it at least a couple of times a year, and after a hard rain if you can. The difference between a dry-day visit and a wet-day visit tells you a lot about whether surface water is getting in.
Is it a problem if there are salamanders in my spring box?
A salamander in a spring box is a common find in the mountains, and it is also a sign there is an opening big enough to let surface water in. The box needs to be sealed, and the water should be tested.
Do I need to chlorinate after cleaning the box?
Often yes, after the box has been opened, cleaned or repaired, especially if debris or animals were inside. We can disinfect the system and help arrange a follow-up lab test. Water testing is something you add on if you want it.
Why is my spring flowing less than it used to?
Late summer and fall are often weaker on mountain springs. Silt in the box, a clogged outlet, or a change uphill can also cut the flow. If the source itself has gone weak, we’ll tell you so.
Do you repair spring boxes in Madison and Yancey counties?
Yes, and across the rest of Western North Carolina, including Buncombe, Haywood, Jackson and the surrounding counties. Call (828) 222-4160 with the property address.
Does the box need more than a cleaning?
Give us the address and what the spring or the water is doing. We’ll get back to you with a time. If you have no water, call (828) 222-4160.